Spray cotton production technology
Spewing principle structure formed by the adhesive is sprayed onto both sides of a fluffy fibrous layer, since certain discharge pressure, together with the lower vacuum suction when the absorbent, inner fiber layer so that the adhesive can penetrate, The sprayed fiber layer is then baked and cured to bond the junction points between the fibers, and there is no fiber bonded to each other between the fibers, and there is still a considerable degree of freedom. At the same time, in the three-dimensional network structure, there is still a lot of air space. Therefore, the fiber layer has a porous, high-lofty warmth retention effect. Because the spray cotton is sprayed with wine instead of adding the binder under the condition of dipping, it will no longer be squeezed and solidified by pressure after spraying. Therefore, in the bonding state of the fibers, there are more contact points at the intersections, and less bridging and agglomeration of the adhesive. This is the main reason why the sprayed cotton can remain soft and warm. The spray glue is taken out of the vacuum packaging bag and placed for at least 24 hours for elastic recovery.
Maintenance guide for spray cotton.
Only wash with water: machine wash, cold wash (≤30℃), light wash, and gently spin dry at low temperature. If cold ironing is required, do not autoclave.
Washing or dry cleaning: machine wash, cold wash (≤30℃), light wash, light wash at low temperature, if you need to use cold ironing to form, do not autoclave. You can also choose a professional dry cleaning method, gently spin dry at room temperature, and only use steam to iron, otherwise dry cleaning will reduce the bulkiness.
Dry cleaning only: professional dry cleaning, gently spin dry at room temperature, only use steam or cold ironing, do not use steam ironing, dry cleaning will reduce the bulkiness.
Zhejiang Fulibang Nonwoven Technology Co., Ltd. was established in 2018 with a registered capital of 60 million. The company is located at No.339 Jiang'an Road, North District, Xinfeng Town Industrial Park, Nanhu District, Jiaxing City, covering an area of more than 20 acres and a modern factory building of 30,000 square meters. Meters, the company has 6 production lines of large-scale non-woven equipment such as silk - like cotton production line, hot-rolled non-woven fabric production line, hot - air non-woven fabric , heat-sealing dust-free paper , integrated dust - free paper , etc., quilting, quilting, and compounding. More than 50 sets of auxiliary equipment. The products involve a series of multi-purpose product clusters in various fields, such as clothing and home textiles, warm-keeping filling, nursing and sanitation, civil cleaning wipes, fine beauty and sanitation materials, and industrial electronic wipes.