With the continuous improvement of the quality of life, fine fiber has become an indispensable part of daily necessities, so how do we distinguish it from non-woven fabrics ? In fact, the method is very simple. We can distinguish fabrics based on the following characteristics.

Fine fiber characteristics

Soft touch and light weight.

Stick the microfiber cloth on the ordinary cloth clothing. When the clothing is vertical, the microfiber cloth is still attached to the clothing. This shows that the fiber denier is fine enough and it is a microfiber cloth.

Third, after being kneaded into a ball, the real microfiber stretches slowly, while the fake microfiber is quickly fluffy.

Non-woven fabric characteristics:

Pay attention to whether the transmittance of the cloth surface is consistent (this is a very simple method to judge the uniformity of the cloth surface). Spread it on a flat ground, the product is even, and the cloth surface should have no undulations.

Observe whether the surface of the cloth is shiny. Whether the fiber floats on the surface, if the floating fiber has no luster or multi-filament floats, mainly depends on the secondary production raw materials. Tear off a piece of cloth and burn it over with fire. Observe the burning residue. Good products have few and flat residues. Waste materials are produced. There are many particles in the residue.

Nowadays, there are more and more kinds of fine fiber cloth on the market. You may as well follow the above method to distinguish.

This product uses non-woven fabric as raw material, which is a new generation of green and friendly materials. It has the advantages of moisture-proof, breathable, soft, light, non-combustible, easy to decompose, mild and non-irritating, rich in color, low in price, and recyclable. This material that has been placed for 90 days can be naturally decomposed outdoors, and can be used indoors after being placed for 5 years. It has no toxicity, no smell, no residue when burned, and will not pollute the environment. It is recognized as a green and friendly environment for protecting the earth’s ecology. product.

benefit:

1. Light weight: Polypropylene resin is used as the main raw material for production, with a specific gravity of only 0.9, accounting for only three-fifths of cotton, with a fluffy feel and good hand feeling.

2. Gentle and non-irritating: The product is produced with FDA food-grade raw materials, does not contain any chemical ingredients, has stable performance, is odorless, and does not irritate the skin.

3. Antibacterial and anti-chemical agents: Polypropylene is a chemically blunt substance without insects, which can prevent the erosion of bacteria and insects in the liquid; antibacterial and alkaline corrosion, the strength of the finished product is not affected by erosion.

Four, value for money. Using polypropylene spinning to directly spread into a net for thermal bonding, the strength of the product is better than that of ordinary staple fiber products, the strength is non-directional, and the vertical and horizontal strengths are similar.

5. Regarding environmental friendliness, most of the non-woven fabrics used are made of polypropylene, while plastic bags are made of polyethylene. Although the names of these two substances are similar, their chemical structures are quite different. The chemical molecular structure of polypropylene is very stable and extremely difficult to degrade, so it takes 300 years for plastic bags to decompose; while the chemical structure of polypropylene is not strong, and the molecular chain is easy to break, so it is difficult to degrade and enter the next environmental cycle. Non-woven fabrics All shopping bags can be disassembled in 90 days. And the non-woven shopping bag can be reused more than 10 times, and the pollution degree to the environment after being discarded is only 10% of the plastic bag.